-
Fiberglass Surface Tissue Mat
1.Mainly used as the surface layers of FRP products.
2.Uniform fiber dispersion, smooth surface, soft hand-feeling, lowbinder content, fast resin impregnation and good mould obedience.
3.Filament winding type CBM series and hand lay-up type SBM series -
Triaxial Fabric Longitudinal Triaxial(0°+45°-45°)
1.Three layers of roving can be stitched, however a layer of chopped strands（0g/㎡-500g/㎡） or composite materials can be added.
2.The maximal width can be 100 inches.
3.Used in blades of wind power turbines, boat manufacturing and sports advices. -
E-glass Assembled Panel Roving
1.For continuous panel molding process is coated with a silane-based sizing compatible with unsaturated polyester.
2.Delivers light weight, high strength and high impact strength,
and is designed to manufacture transparent panels and mats for tansparent panels. -
E-glass Assembled Roving For Spray up
1.Good runnability for spraying operation,
.Moderate wet-out speed,
.Easy roll-out,
.Easyremoval of bubbles，
.No spring back in sharp angles,
.Excellent mechanical properties
2.Hydrolytic resistance in parts,suitable for high-speed spray-up process with robots -
Biaxial Fabric +45°-45°
1.Two layers of rovings（450g/㎡-850g/㎡）are aligned at +45°/-45°
2.With or without a layer of chopped strands（0g/㎡-500g/㎡）.
3.Maximum width of 100 inches.
4.Used in boat manufacturing. -
E-glass Assembled Roving For Filament Winding
1.Specially designed for FRP filament winding process, compatible with unsaturated polyester.
2.Its final composite product delivers excellent mechanical property,
3.Mainly used to manufacture storage vessels and pipes in petroleum, chemical and mining industries. -
E-glass Assembled Roving For SMC
1.Designed for class A surface and structural SMC process.
2.Coated with a high performance compound sizing compatible with unsaturated polyester resin
and vinyl ester resin.
3.Compared with traditional SMC roving,It can deliver high glass content in SMC sheets and has good wet-out and excellent surface property .
4.Used in automotive parts, doors ,chairs, bathtubs, and water tanks and sporrts apparatus -
Direct Roving For LFT
1.It is coated with a silane-based sizing compatible with PA, PBT, PET, PP, ABS, PPS and POM resins.
2.Widely used in industries of automotive, electromechanical, home appliance, building & construction, electronic & electrical, and aerospace -
Direct Roving For CFRT
It is used for CFRT process.
Fiberglass yarns were outside unwound from the bobbins on the shelf and then arranged in the same direction;
Yarns were dispersed by tension and heated by hot air or IR;
Molten thermoplastic compound was provided by an extruder and impregnated the fiberglass by pressure;
After cooling, the final CFRT sheet was formed. -
3D FRP Panel with resin
The 3-D Fiberglass Woven fabric can composite with different resins(polyester,Epoxy,Phenolic and etc), then the final product is 3D composite panel. -
Fiberglass Chopped Strand Mat Powder binder
1.It is made of randomly distributed chopped strands held together by a powder binder.
2.Compatible with UP, VE, EP, PF resins.
3.The roll width ranges from 50mm to 3300mm. -
FRP sheet
It is made of thermosetting plastics and reinforced glass fiber, and its strength is greater than that of steel and aluminum.
The product will not produce deformation and fission at ultra-high temperature and low temperature, and its thermal conductivity is low. It is also resistant to aging, yellowing, corrosion, friction and easy to clean.
