E-Glass Stitched Mat Fiberglass Cloth +/-45 Degree Biaxial Fiber Glass Fabric for Building Material
It is composed of non-twist roving +45°/-45° direction, coil structure woven, can be selected to be used with mat or not.
Product Features
- No binder, suitable for a variety of resin systems
- It has good mechanical properties
- The operation process is simple and the cost is low
Applications
Suitable for all kinds of resin reinforced systems, such as unsaturated polyester resin, vinyl resin and epoxy resin.
It is used in pultrusion, winding, RTM, hand lay up process and other molding products, such as pultrusion plate, profile, bar, pipe lining, storage tank, automobile parts, boat building, insulation board, electrostatic dust anode pipe and other FRP products.
Product List
|
Product No |
Over density |
+45°Roving density |
-45°roving density |
Chop density |
|
|
（g/m2） |
（g/m2） |
（g/m2） |
（g/m2） |
|
BH-BX300 |
306.01 |
150.33 |
150.33 |
- |
|
BH-BX450 |
456.33 |
225.49 |
225.49 |
- |
|
BH-BX600 |
606.67 |
300.66 |
300.66 |
- |
|
BH-BX800 |
807.11 |
400.88 |
400.88 |
- |
|
BH-BX1200 |
1207.95 |
601.3 |
601.3 |
- |
|
BH-BXM450/225 |
681.33 |
225.49 |
225.49 |
225 |
Standard width in 1250mm, 1270mm, and other width could be customized according to customer’s request, available from 200mm to 2540mm.
Packing
It is usually rolled in a paper tube with inner diameter 76mm, then the roll is warped with plastic film and put into export carton, last load on pallets and bulk in container.
Storage
The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.
