China Original Factory Colored Fiberglass Sheets - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

Original Factory Colored Fiberglass Sheets - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Our firm aims to operating faithfully, serving to all of our consumers , and working in new technology and new machine continually for E Type Glass Fiber, ACF, Square Planter Flower Pot, We, with open arms, invite all interested potential buyers to visit our web-site or get in touch with us immediately for further information and facts.

Original Factory Colored Fiberglass Sheets - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Original Factory Colored Fiberglass Sheets - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Las Vegas, Chicago, Belize, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

3d Fiberglass Fabric

3d Fiberglass Woven Fabric

Black Fibreglass Rectangle Planter

Color Size Flower Pot Big Standing Planter

Thin Fiberglass Sheets

Unicirectional Fabric

Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!

By Eden from America - 2017.09.26 12:12

We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!

By Pamela from Grenada - 2018.09.12 17:18

Write your message here and send it to us