OEM/ODM Supplier G150 2/2 Fiberglass Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass
OEM/ODM Supplier G150 2/2 Fiberglass Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass Detail:
Products Description
This series of products are thermosetting molding plastics made of e-glass fiber and modified phenolic resin by soaking and baking. It is used for pressing heat-resistant, moisture-proof, mildew proof, high mechanical strength, good flame retardant insulating parts, but also according to the requirements of the parts, the fiber can be properly combined and arranged, with high tensile strength and bending strength, and suitable for wet conditions.
Storage:
It should be stored in a dry and ventilated room where the temperature does not exceed 30℃.
Do not close to fire, heating and direct sunlight, erect stored on a special platform, horizontal stacking and heavy pressure are strictly prohibited.
Shelf life is two months from the date of production. After the storage period, the product can still be used after passing the inspection according to the product standards. Technical standard: JB/T5822-2015
Specification:
|
Test Standard |
JB/T5822-91 JB/3961-8 |
|||
|
NO. |
Test Items |
Unit |
Requirememt |
Test Results |
|
1 |
Resin Content |
% |
Negotiable |
38.6 |
|
2 |
Volatile Matter Content |
% |
3.0-6.0 |
3.87 |
|
3 |
Density |
g/cm3 |
1.65-1.85 |
1.90 |
|
4 |
Water Absorption |
mg |
≦20 |
15.1 |
|
5 |
Martin Temperature |
℃ |
≧280 |
290 |
|
6 |
Bending Strength |
MPa |
≧160 |
300 |
|
7 |
Impact Strength |
KJ/m2 |
≧50 |
130 |
|
8 |
Tensile Strength |
MPa |
≧80 |
180 |
|
9 |
Surface Resistivity |
Ω |
≧10×1011 |
10×1011 |
|
10 |
Volume Resistivity |
Ω.m |
≧10×1011 |
10×1011 |
|
11 |
Medium wearing factor (1MHZ) |
- |
≦0.04 |
0.03 |
|
12 |
Relative Permittivity (1MHZ) |
- |
≧7 |
11 |
|
13 |
Dielectric Strength |
MV/m |
≧14.0 |
15 |
Note:
The information given in this document is based on the existing technology level of the company.
The typical data listed in the table are collected from the internal test results for the reference of users in selecting materials. This document should not be regarded as an official commitment or quality guarantee, and users should determine the suitability of materials for their specific applications.
The above parameters can be adjusted according to customer requirements.
Product detail pictures:
Related Product Guide:
We always continually offer you the most conscientious purchaser services, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for OEM/ODM Supplier G150 2/2 Fiberglass Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass , The product will supply to all over the world, such as: Angola, Portland, Paraguay, Our staffs are rich in experience and trained strictly, with qualified knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to deliver the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we'll develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.
By Althea from Ottawa - 2018.11.06 10:04
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Ella from Iraq - 2017.09.09 10:18
