China OEM/ODM Factory Tabletop Flower Pot - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

OEM/ODM Factory Tabletop Flower Pot - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth "unification, determination, tolerance" for 4x8 Rigid Fiberglass Panels, Fiberglass Needled Mat, Fiberglass Custom Made Flower Pot, We're going to make higher efforts that can help domestic and international potential buyers, and produce the mutual advantage and win-win partnership between us. we're eagerly waiting for your sincerely cooperation.

OEM/ODM Factory Tabletop Flower Pot - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for OEM/ODM Factory Tabletop Flower Pot - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Panama, Egypt, America, Now we've been sincerely consider to grant brand agent in different areas and our agents' maximum margin of profit is the most important thing we care about. Welcome all of the friends and customers to join us. We have been ready to share win-win corporation.

3d Fiberglass Woven Fabric