- Part 26

Glass fiber reinforced polymer creates a “melted chair”
by admin on 21-08-06
This chair is made of glass fiber reinforced polymer, and the surface is coated with a special silver coating, which has anti-scratch and anti-adhesion functions. In order to create the perfect sense of reality for the “melting chair”, Philipp Aduatz used modern 3D animation software ...
Read more
[Fiberglass] What are the new requirements for glass fiber in 5G?
by admin on 21-08-05
1. 5G performance requirements for glass fiber Low dielectric, low loss With the rapid development of 5G and the Internet of Things, higher requirements are put forward for the dielectric properties of electronic components under high-frequency transmission conditions. Therefore, glass fibers ...
Read more
3D printing bridge uses environmentally friendly material carbonated polyester
by admin on 21-08-04
Heavy! Modu was born in China’s first 3D printed telescopic bridge! The length of the bridge is 9.34 meters, and there are 9 stretchable sections in total. It only takes 1 minute to open and close, and it can be controlled via mobile phone Bluetooth! The bridge body is made of environmental...
Read more
Speedboats that can absorb carbon dioxide will be born (Made of eco fiber)
by admin on 21-08-03
The Belgian start-up ECO2boats is preparing to build the world’s first recyclable speedboat.OCEAN 7 will be made entirely of ecological fibers. Unlike traditional boats, it does not contain fiberglass, plastic or wood. It is a speedboat that does not pollute the environment but can take 1 t...
Read more
[Share] Application of Glass Fiber Mat Reinforced Thermoplastic Composite (GMT) in Automobile
by admin on 21-08-02
Glass Mat Reinforced Thermorplastic (GMT) refers to a novel, energy-saving and lightweight composite material that uses thermoplastic resin as a matrix and glass fiber mat as a reinforced skeleton. It is currently an extremely active composite material in the world. The development of materials i...
Read more
Secrets of the new material technology for the Tokyo Olympics
by admin on 21-07-30
The Tokyo Olympics kicked off as scheduled on July 23, 2021. Due to the postponement of the new crown pneumonia epidemic for one year, this Olympic Games is destined to be an extraordinary event and it is also destined to be recorded in the annals of history. Polycarbonate (PC) 1. PC sunshine bo...
Read more
FRP Flower Pots | Outdoor Flower Pots
by admin on 21-07-28
Features of FRP outdoor flowerpots: It has excellent characteristics such as strong plasticity, high strength, corrosion resistance, anti-aging, beautiful and durable, and long service life. The style can be customized, the color can be freely matched, and the choice is large and economical. The ...
Read more
Natural and simple fiberglass fallen leaves!
by admin on 21-07-27
The Wind Blows Over You Is the Finnish sculptor Kaarina Kaikkonen Made of paper and glass fiber Giant Umbrella Leaf Sculpture Every leaf Restore the original appearance of the leaves to a great extent Earthy colors Clear leaf veins As if in the real world Free fall and withered leaves
Read more
The use of composite materials gives summer Olympic and Paralympic athletes a competitive advantage（Activated carbon fiber）
by admin on 21-07-26
The Olympic motto-Citius, Altius, Fortius-Latin and higher, stronger and faster-communicate together in English, which has always been applied to the performance of Olympic and Paralympic athletes. As more and more sports equipment manufacturers use composite materials, the motto now applies to s...
Read more
Made of fiberglass, a stackable portable table and chair combination
by admin on 21-07-23
This portable desk and chair combination is made of fiberglass, providing the device with much-needed portability and durability. Since fiberglass is a sustainable and affordable material, it is inherently light and strong. The customizable furniture unit is mainly composed of four parts, which c...
Read more
The world’s first! What is the experience of “flying close to the ground”? The high-speed maglev transportation system at a speed of 600 kilometers per hour rolls off the assembly...
by admin on 21-07-22
my country has made major innovation breakthroughs in the field of high-speed maglev. On July 20, my country’s 600 km/h high-speed maglev transportation system, which was developed by CRRC and has completely independent intellectual property rights, was successfully rolled off the assembly line i...
Read more
Continuous glass fiber reinforced 3D printed houses are coming soon
by admin on 21-07-22
The California company Mighty Buildings Inc. officially launched Mighty Mods, a 3D printed prefabricated modular residential unit (ADU), manufactured by 3D printing, using thermoset composite panels and steel frames. Now, in addition to selling and building Mighty Mods using a large-scale addit...
Read more