China China OEM Fiberglass Pot Round - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

China OEM Fiberglass Pot Round - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

Our goal is to provide high quality products at competitive prices, and top-notch service to customers around the world. We are ISO9001, CE, and GS certified and strictly adhere to their quality specifications for Glass Fiber Mats, Hotel Flower Pot, Flowerpot, We welcome new and outdated clients from all walks of daily life to get hold of us for long term organization associations and achieving mutual results!

China OEM Fiberglass Pot Round - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

Usually customer-oriented, and it's our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for China OEM Fiberglass Pot Round - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Bolivia, Curacao, Lahore, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.

3d Fiber Glass Fabric

3d Fiberglass Cloth

Bullet Resistant Fiberglass Panels

Cup Shaped Flower Pot

Decoration Flower Pots

Exterior Fiberglass Wall Panels

Fiber Glass Planter

Fiberglass Filler

Large Resin Flower Pots

Planter Pots

This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!