products

Special Design for 4×8 Fiberglass Panels - 3D Inside Core – Beihai Fiberglass

short description:


Product Detail

Product Tags

Related Video

Feedback (2)

we can offer high quality products, competitive price and best customer service. Our destination is "You come here with difficulty and we give you a smile to take away" for Fancy Flowers Pot, White Fiberglass Sheet, Black Rectangular Fibreglass Planter, We always welcome new and old customers presents us with valuable advice and proposals for cooperation, let us grow and develop together, and to contribute to our community and staff!
Special Design for 4×8 Fiberglass Panels - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)


Product detail pictures:

Special Design for 4×8 Fiberglass Panels - 3D Inside Core  – Beihai Fiberglass detail pictures

Special Design for 4×8 Fiberglass Panels - 3D Inside Core  – Beihai Fiberglass detail pictures

Special Design for 4×8 Fiberglass Panels - 3D Inside Core  – Beihai Fiberglass detail pictures

Special Design for 4×8 Fiberglass Panels - 3D Inside Core  – Beihai Fiberglass detail pictures

Special Design for 4×8 Fiberglass Panels - 3D Inside Core  – Beihai Fiberglass detail pictures


Related Product Guide:

With this motto in mind, we've come to be one of quite possibly the most technologically innovative, cost-efficient, and price-competitive manufacturers for Special Design for 4×8 Fiberglass Panels - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Dubai, Uzbekistan, Finland, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good products quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!
  • The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
    5 Stars By Andrew from Australia - 2017.01.28 18:53
    Problems can be quickly and effectively resolved, it is worth to be trust and working together.
    5 Stars By Kama from Porto - 2017.10.23 10:29
    Write your message here and send it to us