China OEM Factory for Decorative Flower Pots - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

OEM Factory for Decorative Flower Pots - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We keep on with the basic principle of "quality to start with, support very first, continuous improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the quality objective. To great our service, we offer the items with all the superior top quality at the reasonable selling price for Fiberglass Stitched Mat With Chopped Strand, Garden Flower Pots, Stitched Combo Mat, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.

OEM Factory for Decorative Flower Pots - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

The key to our success is "Good Product Quality, Reasonable Price and Efficient Service" for OEM Factory for Decorative Flower Pots - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: India, Philadelphia, Montreal, Our Company has professional engineers and technical staff to answer your questions about maintenance problems, some common failure. Our product quality assurance, price concessions, any questions about the products, Please feel free to contact us.

3d Woven Fabric