China Manufacturing Companies for Long Chopped Fiber Glass - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

Manufacturing Companies for Long Chopped Fiber Glass - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

"Based on domestic market and expand overseas business" is our development strategy for Frp Plywood Panels, Flower Pots Planters, Chopped Basalt Fiber, Our professional technical team will be wholeheartedly at your service. We sincerely welcome you to visit our website and company and send us your inquiry.

Manufacturing Companies for Long Chopped Fiber Glass - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Manufacturing Companies for Long Chopped Fiber Glass - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Denmark, Honduras, Costa rica, We always insist on the management tenet of "Quality is first, Technology is basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.

Cup Shape Flower Pot

Entrance Fiberglass Door

Exterior Door Fiberglass

Exterior Fiberglass Wall Panels

Large Indoor Flower Pot

Long Glass Fiber

Outdoor Garden Flowerpot

Plastic Flower Pots

Smc Door

Structural Fiberglass Sheets

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.

By Debby from Bangalore - 2018.09.21 11:01

Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.

By Antonio from Ottawa - 2018.02.21 12:14

Write your message here and send it to us