Hot-selling Corrosion Resistance Fiberglass Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass
Hot-selling Corrosion Resistance Fiberglass Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass Detail:
Products Description
This series of products are thermosetting molding plastics made of e-glass fiber and modified phenolic resin by soaking and baking. It is used for pressing heat-resistant, moisture-proof, mildew proof, high mechanical strength, good flame retardant insulating parts, but also according to the requirements of the parts, the fiber can be properly combined and arranged, with high tensile strength and bending strength, and suitable for wet conditions.
Storage:
It should be stored in a dry and ventilated room where the temperature does not exceed 30℃.
Do not close to fire, heating and direct sunlight, erect stored on a special platform, horizontal stacking and heavy pressure are strictly prohibited.
Shelf life is two months from the date of production. After the storage period, the product can still be used after passing the inspection according to the product standards. Technical standard: JB/T5822-2015
Specification:
|
Test Standard |
JB/T5822-91 JB/3961-8 |
|||
|
NO. |
Test Items |
Unit |
Requirememt |
Test Results |
|
1 |
Resin Content |
% |
Negotiable |
38.6 |
|
2 |
Volatile Matter Content |
% |
3.0-6.0 |
3.87 |
|
3 |
Density |
g/cm3 |
1.65-1.85 |
1.90 |
|
4 |
Water Absorption |
mg |
≦20 |
15.1 |
|
5 |
Martin Temperature |
℃ |
≧280 |
290 |
|
6 |
Bending Strength |
MPa |
≧160 |
300 |
|
7 |
Impact Strength |
KJ/m2 |
≧50 |
130 |
|
8 |
Tensile Strength |
MPa |
≧80 |
180 |
|
9 |
Surface Resistivity |
Ω |
≧10×1011 |
10×1011 |
|
10 |
Volume Resistivity |
Ω.m |
≧10×1011 |
10×1011 |
|
11 |
Medium wearing factor (1MHZ) |
- |
≦0.04 |
0.03 |
|
12 |
Relative Permittivity (1MHZ) |
- |
≧7 |
11 |
|
13 |
Dielectric Strength |
MV/m |
≧14.0 |
15 |
Note:
The information given in this document is based on the existing technology level of the company.
The typical data listed in the table are collected from the internal test results for the reference of users in selecting materials. This document should not be regarded as an official commitment or quality guarantee, and users should determine the suitability of materials for their specific applications.
The above parameters can be adjusted according to customer requirements.
Product detail pictures:
Related Product Guide:
Our enterprise since its inception, usually regards product top quality as business life, repeatedly enhance manufacturing technology, make improvements to product excellent and continuously strengthen enterprise total high quality administration, in strict accordance with all the national standard ISO 9001:2000 for Hot-selling Corrosion Resistance Fiberglass Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass , The product will supply to all over the world, such as: Georgia, Angola, Honduras, At present our sales network is growing continually, improving service quality to meet customer's demand. If you are interested in any products , please contact us at anytime. We are looking forward to forming successful business relationships with you in near future.
By Eve from Nicaragua - 2018.06.21 17:11
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Debby from Hungary - 2018.10.09 19:07
