High Quality for Fiberglass Smc Roving For Car Body Using - E-glass Assembled Roving For Chopping – Beihai Fiberglass
High Quality for Fiberglass Smc Roving For Car Body Using - E-glass Assembled Roving For Chopping – Beihai Fiberglass Detail:
E-glass Assembled Roving For Chopping
Assembled Roving for Chopping is coated with special silane-based sizing, compatible with UP and VE, delivering relatively high resin absorbability and excellent choppability, while its final composite products deliver superior water resistance and excellent chemical corrosion resistance.
Features
●High resin absorbability
●Excellent choppability
●Superior water resistance
● excellent chemical corrosion resistance of final products
Application
It is typically used to manufacture FRP pipes.
Product List
|
Item |
Linear Density |
Resin Compatibility |
Features |
End Use |
|
BHC-01A |
2400, 4800 |
UP, VE |
good dispersion, moderate wet out in resin, good static control |
FRP pipes |
|
BHC-02A |
2400, 4800 |
UP, VE |
few fuzz, good choppability, excellent chemical resistance |
as chop roving for pipe manufacture |
| Identification | |
| Type of Glass |
E |
| Assembled Roving |
R |
| Filament Diameter, μm |
13 |
| Linear Density, tex |
2400, 4800 |
| Technical Parameters | |||
|
Linear Density (%) |
Moisture Content (%) |
Size Content (%) |
Stiffness (mm) |
|
ISO 1889 |
ISO 3344 |
ISO 1887 |
ISO 3375 |
|
±6 |
≤0.15 |
1.20±0.15 |
125±20 |
Filament Winding Process
Traditional Filament Winding
In the filament winding process , continuous strands of resin-impregnated glassfiber are wound under tension onto a mandrel in precise geometric patterns tobuild up the part which is then cured to form the finished parts.
Continuous Filament Winding
Multiple laminate layers , composed of resin , reinforcement glass and other materials are applied to a rotating mandrel , which is formed from a continuous steel band continuously traveling in a cork-screw motion . The composite part is heated and cured in place as the mandrel travels through the line and then cut into a specific length with a traveling cut-off saw .
Product detail pictures:
Related Product Guide:
Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for High Quality for Fiberglass Smc Roving For Car Body Using - E-glass Assembled Roving For Chopping – Beihai Fiberglass , The product will supply to all over the world, such as: Mauritius, Mexico, Madrid, We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always. We believe you will benefit from our professionalism soon.
By Yannick Vergoz from Kenya - 2018.07.12 12:19
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Marguerite from Haiti - 2017.09.30 16:36
