-
Wholesale Price Glass Fiber Material - Woven Roving Combo Mat – Beihai Fiberglass
Woven Roving Combo Mat Woven Roving Combo Mat Woven roving combo mat is knitted with two levels, fiberglass woven fabric and chop mat. The weight of fiber glass woven fabric is 300-900g/m2, chop mat is 50g/m2-500g/m2. The width of woven roving combo mat can reach 110 inches Structure Application The main usage of woven roving combo mat is boating, wind blades and sport goods. Product List Product No Over density Woven roving density Chop density Polyester yarn density ... -
New Fashion Design for Fiberglass Modern Plant Pot - 3D FRP Panel with resin – Beihai Fiberglass
The 3-D Fiberglass Woven fabric can composite with different resins(polyester,Epoxy,Phenolic and etc), then the final product is 3D composite panel. Advantage 1. light weight bur high strength 2. Great resistance against delamination 3. High design – versatility 4. Space between both deck layers can be multifunctional(Embedded with sensors and wires or infused with foam) 5. Simple and effective lamination process 6. Heat insulation and sound insulation, Fireproof, Wave transmittable Applicati... -
Reasonable price Fiberglass Reinforced Mat - PP Core Mat – Beihai Fiberglass
CORE MAT FOR RTM It is a stratified reinforcing glass fiber mat composed by3, 2 or 1 layer of fiber glass and 1or 2 layers of polypropylene fibers. This reinforcing material has been specially designed for the RTM, RTM light, Infusion and cold press molding CONSTRUCTION The exterior layers of fiber glass have an areal weight from 250 to 600 gr/m2. To provide a good surface aspect is recommended to have 250g/m2 as minimum in the external layers,asthough o... -
China Cheap price Frp Electrical Panel - FRP sheet – Beihai Fiberglass
FRP Sheet FRP sheet is made of thermosetting plastics and reinforced glass fiber, and its strength is greater than that of steel and aluminum. The product will not produce deformation and fission at ultra-high temperature and low temperature, and its thermal conductivity is low. It is also resistant to aging, yellowing, corrosion, friction and easy to clean. Features High mechanical strength and good impact toughness; Roughness surface and easy to clean; Corrosion resistance, wear resistance... -
18 Years Factory Clear Fiberglass Panels - 3D Inside Core – Beihai Fiberglass
The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board. Advantage Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP). With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect buildin... -
Renewable Design for Fiberglass Panels For Rv - 3D FRP Panel with resin – Beihai Fiberglass
The 3-D Fiberglass Woven fabric can composite with different resins(polyester,Epoxy,Phenolic and etc), then the final product is 3D composite panel. Advantage 1. light weight bur high strength 2. Great resistance against delamination 3. High design – versatility 4. Space between both deck layers can be multifunctional(Embedded with sensors and wires or infused with foam) 5. Simple and effective lamination process 6. Heat insulation and sound insulation, Fireproof, Wave transmittable Applicati... -
Competitive Price for 4×8 Rigid Fiberglass Panels - 3D Fiberglass Woven Fabric – Beihai Fiberglass
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction. Product Characteristics The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced. The range of the pillar height:3-50 mm, the range of the width:≤3000 mm. The designs of structure ... -
Manufacturer of Outdoor Garden Flowerpot - 3D FRP Sandwich Panel – Beihai Fiberglass
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process). Advantage ●Fully Fashioned. ●Panel face is very beautiful, ●High strength. ●One-time finishing, slove the problem of traditional sandwich panel foaming. Structure chart If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, an... -
PriceList for Big Bobbin G150 1/3 Ec9 99tex Fiberglass Yarn - E-Glass 2400 tex Filament Gypsum Rovings Spray-Up Multi-End Plied Glass Fiber direct Roving yarn – Beihai Fiberglass
Assembled Roving for spray-up is compatible with UP and VE resins. It delivers properties of low static, excellent dispersion, and good wet out in resins. Product Features: 1) Low static. 2) Excellent dispersion. 3) Good wet-out in resins. Item Linear Density Resin Compatibility Features End Use BHSU-01A 2400, 4800 UP, VE fast wet out, easy roll-out, optimum dispersion bathtub, supporting components BHSU-02A 2400, 4800 UP, VE ... -
Bottom price Fiberglass Pultrusion Roving - E-glass Assembled Roving For GMT – Beihai Fiberglass
E-glass Assembled Roving For Spray up Assembled Roving for spray-up is compatible with UP and VE resins. It delivers properties of low static, excellent dispersion, and good wet out in resins. Features ●Low static ●Excellent dispersion ●Good wet-out in resins Application It covers a wide range of applications: bathtub, FRP boat hulls, various pipes, storage vessels and cooling towers. Product List Item Linear Density Resin Compatibility Features End Use BHSU-01A 2400, 4800... -
Hot-selling FRP Fiberglass Pot - FRP Door – Beihai Fiberglass
FRP door is a new generation environmental-friendly and energy-efficiency door, more excellent than previous ones of wood, steel, aluminum and plastic. It is composed of high strength SMC skin, polyurethane foam core and plywood frame. It features energy-saving, eco-friendly, heat insulation, high strength, light weight, anti-corrosion, good weatherability, dimensional stability, long life span, varied colors etc. Features ●Aesthetically Pleasing 1) True resemblance of a real oak wood door... -
High Quality Chopped Strands For Pp - Wet Chopped Strands – Beihai Fiberglass
Wet Chopped Strand are compatible with unsaturated polyester, epoxy, and phenolic resins. Wet Chopped Strands is used in the water dispersion process to produce wet light weight mat. Features ●Fast and uniform dispersion in gypsum ●Good flowability ●Excellent properties in composite product ●Excellent acid corrosion resistance Application Wet Chopped Strands are formed by chopping continuous fiber to a certain length, mainly used in gypsum industry. Product Lsit Item No. Chop Length,m...
