-
2021 High quality Hollow Glass Microsphere – Hollow Glass Microspheres – Beihai Fiberglass
Hollow Glass Microspheres, a kind of ultra-light inorganic non-metallic powder with hollow “ball-bearing” shapes, have been developed into a new type of high performance lightweight material and widely applied in recent years. It will be the main direction for new-type compound materials in the 21st century. Characteristics 1. light weight, bulk density, lower thermal conductivity, 2. higher compressive strength, improved dispersion and liquidity 3. higher filler loading, lower viscosity/i... -
Factory Supply Fiberglass Panel Roving - E-glass Assembled Roving For GMT – Beihai Fiberglass
E-glass Assembled Roving For Spray up Assembled Roving for spray-up is compatible with UP and VE resins. It delivers properties of low static, excellent dispersion, and good wet out in resins. Features ●Low static ●Excellent dispersion ●Good wet-out in resins Application It covers a wide range of applications: bathtub, FRP boat hulls, various pipes, storage vessels and cooling towers. Product List Item Linear Density Resin Compatibility Features End Use BHSU-01A 2400, 4800... -
OEM Supply Large Resin Flower Pots - 3D FRP Panel with resin – Beihai Fiberglass
The 3-D Fiberglass Woven fabric can composite with different resins(polyester,Epoxy,Phenolic and etc), then the final product is 3D composite panel. Advantage 1. light weight bur high strength 2. Great resistance against delamination 3. High design – versatility 4. Space between both deck layers can be multifunctional(Embedded with sensors and wires or infused with foam) 5. Simple and effective lamination process 6. Heat insulation and sound insulation, Fireproof, Wave transmittable Applicati... -
High Quality Fiberglass Entry Doors With Sidelights - 3D Fiberglass Woven Fabric – Beihai Fiberglass
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction. Product Characteristics The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced. The range of the pillar height:3-50 mm, the range of the width:≤3000 mm. The designs of structure ... -
OEM China C Glass Fiber Yarn - Continuous Fiber Reinforced Thermoplastic Tape – Beihai Fiberglass
Products Description Continuous Fiber Reinforced Thermoplastic Tape is applied to produce sandwich panels (honeycomb or foam core), laminated panels for vehicle lighting applications, and also for continuous fiber reinforced thermoplastic pipe. Category: Continuous fiberglass reinforced thermoplastic (PP) Product Features: 1) Excellent specific strength and modulus 2) Good compact strength 3) Good chemical resistance, no VOC 4) Recyclable 5) Easy to use Product Proper... -
Chinese Professional Frp Flat Sheet - FRP sheet – Beihai Fiberglass
FRP Sheet FRP sheet is made of thermosetting plastics and reinforced glass fiber, and its strength is greater than that of steel and aluminum. The product will not produce deformation and fission at ultra-high temperature and low temperature, and its thermal conductivity is low. It is also resistant to aging, yellowing, corrosion, friction and easy to clean. Features High mechanical strength and good impact toughness; Roughness surface and easy to clean; Corrosion resistance, wear resistance... -
2021 China New Design Gray Frp Panels - FRP sheet – Beihai Fiberglass
FRP Sheet FRP sheet is made of thermosetting plastics and reinforced glass fiber, and its strength is greater than that of steel and aluminum. The product will not produce deformation and fission at ultra-high temperature and low temperature, and its thermal conductivity is low. It is also resistant to aging, yellowing, corrosion, friction and easy to clean. Features High mechanical strength and good impact toughness; Roughness surface and easy to clean; Corrosion resistance, wear resistance... -
Manufacturer for Stitched Chopped Strand Mat - E-glass Stitched Chopped Strand Mat – Beihai Fiberglass
E-glass Stitched Chopped Strand Mat(450g/m2-900g/m2) is made by chopping continuous strands into chopped strands and stitching together. The product has a maximum width of 110 inches. this product can be used in manufacturing boat manufacturing tubes. Technical Specification Product No Over density Chop density Polyester Yarn Density BH-EMK300 309.5 300 9.5 BH-EMK380 399 380 19 BH-EMK450 459.5 450 9.5 BH-EMK450 469 450 19 BH-EMC0020 620.... -
Good Quality Fiberglass Needled Mat – Fiberglass Needle Mat – Beihai Fiberglass
1.Fiberglass Needle Mat It has the advantages of high temperature resistance, corrosion resistance, dimensional stability, low elongation shrinkage and high strength,and the fiberglass mat are single fiber, three-dimensional microporous structure, high porosity, little resistance to gas filtration, It is a high-speed,high-efficiency high-temperature filter material.Compared with other high-temperature chemical fiber mats, it has the advantages that higher temperature and other special advant... -
Factory wholesale Frp Door - FRP sheet – Beihai Fiberglass
FRP Sheet FRP sheet is made of thermosetting plastics and reinforced glass fiber, and its strength is greater than that of steel and aluminum. The product will not produce deformation and fission at ultra-high temperature and low temperature, and its thermal conductivity is low. It is also resistant to aging, yellowing, corrosion, friction and easy to clean. Features High mechanical strength and good impact toughness; Roughness surface and easy to clean; Corrosion resistance, wear resistance... -
High Quality Frp Pipes Fiberglass Woven Roving 400g - FRP sheet – Beihai Fiberglass
FRP Sheet FRP sheet is made of thermosetting plastics and reinforced glass fiber, and its strength is greater than that of steel and aluminum. The product will not produce deformation and fission at ultra-high temperature and low temperature, and its thermal conductivity is low. It is also resistant to aging, yellowing, corrosion, friction and easy to clean. Features High mechanical strength and good impact toughness; Roughness surface and easy to clean; Corrosion resistance, wear resistance... -
Good User Reputation for Fiberglass Sheeting Panels - 3D FRP Sandwich Panel – Beihai Fiberglass
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process). Advantage ●Fully Fashioned. ●Panel face is very beautiful, ●High strength. ●One-time finishing, slove the problem of traditional sandwich panel foaming. Structure chart If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, an...
