-
Professional China Jushi Chopped Strand Mat - E-glass Stitched Chopped Strand Mat – Beihai Fiberglass
E-glass Stitched Chopped Strand Mat(450g/m2-900g/m2) is made by chopping continuous strands into chopped strands and stitching together. The product has a maximum width of 110 inches. this product can be used in manufacturing boat manufacturing tubes. Technical Specification Product No Over density Chop density Polyester Yarn Density BH-EMK300 309.5 300 9.5 BH-EMK380 399 380 19 BH-EMK450 459.5 450 9.5 BH-EMK450 469 450 19 BH-EMC0020 620.... -
2021 High quality Activated Carbon Fiber Felt Mat - Active Carbon Fiber Fabric – Beihai Fiberglass
Active Carbon Fiber Fabric, another name is activated carbon cloth, adopt the macromolecule material to make the good activated carbon powder organically integrated with non-woven cloth, it can not only adsorb the organic chemistry substance, but also can filtrate the ash in air, having the characteristics of stable dimension, low air resistance and high absorption ability. Feature ●High specific surface area ●High strength ●Small pore ●Large electric capacity ●Small air resistance ●Not easy ... -
China wholesale Fiberglass Core Mat - Triaxial Fabric Transverse Trixial(+45°90°-45°) – Beihai Fiberglass
Triaxial Series Transverse Triaxial (+45°/ 90°/ -45°) At most three layers of roving can be stitched, however a layer of chopped strands（0g/㎡-500g/㎡） or composite materials can be added. The maximal width can be 100 inches. Structure Application Transverse triaxial combo mat is used in blades of wind power turbines, boat manufacturing and sports advices. Product List Product No Overall density +45°roving density 90°roving density -45°roving density Chop density ... -
Best quality Hay Flower Pot - 3D Fiberglass Woven Fabric – Beihai Fiberglass
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction. Product Characteristics The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced. The range of the pillar height:3-50 mm, the range of the width:≤3000 mm. The designs of structure ... -
Wholesale Price China Fiber Glsss Pot - 3D FRP Sandwich Panel – Beihai Fiberglass
3D FRP stiched foam sandwich panel is new process.New process can produce high strength and density of homogeneous composite panel. Sew highdensity PU plate into the special 3 d fabric, through the RTM (vacuum moldig process). Advantage ●Fully Fashioned. ●Panel face is very beautiful, ●High strength. ●One-time finishing, slove the problem of traditional sandwich panel foaming. Structure chart If it is molded in ordinary 3D cloth and then filled with PU foam, the foam will not be uniform, an... -
New Arrival China Glass Fibre Roving - E-glass Assembled Roving For Filament Winding – Beihai Fiberglass
E-glass Assembled Roving For Filament Winding Assembled Roving for Filament Winding is specially designed for FRP filament winding process, compatible with unsaturated polyester. Its final composite product delivers excellent mechanical property. Features ●Excellent mechanical property ●Fast wet out in resins ●Low fuzz Application It is mainly used to manufacture storage vessels and pipes in petroleum, chemical and mining industries. Product List Item Linear Density Resin Compatibil... -
8 Year Exporter Large Indoor Flower Pot - 3D Inside Core – Beihai Fiberglass
The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board. Advantage Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP). With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect buildin... -
Factory wholesale Cup Shaped Flower Pot - 3D Inside Core – Beihai Fiberglass
The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board. Advantage Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP). With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect buildin... -
Bottom price G150 1/0 Fiberglass Yarn - Thermoplastic Sandwich Panels – Beihai Fiberglass
Product Description Thermoplastic Sandwich Panels are of high strength, lightweight and recyclable, thus are widely applied in van panels, architecture application and high-end packing field.Category: Lightweight thermoplastic sandwich Panels (PP) Product Features: 1) Specially designed structure, light weight 2) Excellent specific strength and modulus 3) Good chemical and water resistance 4) Recyclable, environment friendly Product Properties Properties Test Standards Un... -
Reliable Supplier Fiberglass Sheet For Gate - 3D Fiberglass Woven Fabric – Beihai Fiberglass
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction. Product Characteristics The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced. The range of the pillar height:3-50 mm, the range of the width:≤3000 mm. The designs of structure ... -
Good Quality Fiberglass Needled Mat – Fiberglass Needle Mat – Beihai Fiberglass
1.Fiberglass Needle Mat It has the advantages of high temperature resistance, corrosion resistance, dimensional stability, low elongation shrinkage and high strength,and the fiberglass mat are single fiber, three-dimensional microporous structure, high porosity, little resistance to gas filtration, It is a high-speed,high-efficiency high-temperature filter material.Compared with other high-temperature chemical fiber mats, it has the advantages that higher temperature and other special advant... -
High reputation Big Bobbin G150 1/0 Ec9 33tex Fiberglass Yarn - Fiberglass Sleeving – Beihai Fiberglass
Glass fiber sleeving content of the high temperature resistance, it is composed of e fiberglass. The glass fiber sleeve with its good dielectric strength, flexibility and flame retarding properties. This high temperature sleeve provides protection for industrial wires, cables, hoses,uninsulated or partially insulated conductors,busbars,component leads, provide thermal insulation and personal protection. Specification: 1.Made with high quality fiberglass 2.High temperature 3.Good dielectr...
