China Factory supplied Fiberglass Exterior Doors - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

Factory supplied Fiberglass Exterior Doors - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Stitched Combo Mat, Fiberglass Flower Planter, Fiberglass Complex Mat, Always for the majority of business users and traders to provide best quality products and excellent service. Warmly welcome to join us, let's innovation together, to flying dream.

Factory supplied Fiberglass Exterior Doors - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

Now we have highly developed devices. Our items are exported towards the USA, the UK and so on, enjoying a great popularity among the customers for Factory supplied Fiberglass Exterior Doors - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Berlin, Nepal, Puerto Rico, With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.

E Glass Powder