China Factory Promotional Fiberglass Entry Doors - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

Factory Promotional Fiberglass Entry Doors - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We regularly perform our spirit of ''Innovation bringing progress, Highly-quality making certain subsistence, Administration marketing benefit, Credit score attracting customers for Glass Fiber Roving Materials, 3d Mesh 10mm Fiberglass Fabric, Fiber Glass Chop Mat, We attend seriously to produce and behave with integrity, and by the favor of customers at home and abroad in the xxx industry.

Factory Promotional Fiberglass Entry Doors - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Factory Promotional Fiberglass Entry Doors - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Bandung, Slovenia, Singapore, Our faith is to be honest first, so we just supply high quality products to our customers. Really hope that we can be business partners. We believe that we can establish long time business relationship with each other. You can contact us freely for more information and pricelist of our products !

Decoration Flower Pots

Decorative Flower Pot

Fiberglass Chopped

Fiberglass Large Flower Pots

Fiberglass Sheet For Balcony

Garden Planter

High Modulus Glass Fiber

Non Woven Glass Fiber

Outdoor Garden Flower Pot

Plant Pots Flower

The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!

By Erica from Manchester - 2017.03.08 14:45

We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!

By Brook from Sri Lanka - 2018.11.22 12:28

Write your message here and send it to us