China 2021 Good Quality Fiberglass Filament Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass manufacturers and suppliers

2021 Good Quality Fiberglass Filament Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Fiber Glass Door, 3d Mesh 10mm Fiberglass Fabric, Fiberglass Sheeting Panels, We've been prepared to cooperate with company friends from at your home and overseas and produce a wonderful future with each other.

2021 Good Quality Fiberglass Filament Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass Detail:

Products Description

This series of products are thermosetting molding plastics made of e-glass fiber and modified phenolic resin by soaking and baking. It is used for pressing heat-resistant, moisture-proof, mildew proof, high mechanical strength, good flame retardant insulating parts, but also according to the requirements of the parts, the fiber can be properly combined and arranged, with high tensile strength and bending strength, and suitable for wet conditions.

Storage:

It should be stored in a dry and ventilated room where the temperature does not exceed 30℃.

Do not close to fire, heating and direct sunlight, erect stored on a special platform, horizontal stacking and heavy pressure are strictly prohibited.

Shelf life is two months from the date of production. After the storage period, the product can still be used after passing the inspection according to the product standards. Technical standard: JB/T5822-2015

Specification:

Test Standard		JB/T5822-91 JB/3961-8
NO.	Test Items	Unit	Requirememt	Test Results
1	Resin Content	%	Negotiable	38.6
2	Volatile Matter Content	%	3.0-6.0	3.87
3	Density	g/cm³	1.65-1.85	1.90
4	Water Absorption	mg	≦20	15.1
5	Martin Temperature	℃	≧280	290
6	Bending Strength	MPa	≧160	300
7	Impact Strength	KJ/m²	≧50	130
8	Tensile Strength	MPa	≧80	180
9	Surface Resistivity	Ω	≧10×10¹¹	10×10¹¹
10	Volume Resistivity	Ω.m	≧10×10¹¹	10×10¹¹
11	Medium wearing factor (1MH_Z)	-	≦0.04	0.03
12	Relative Permittivity (1MHZ)	-	≧7	11
13	Dielectric Strength	MV/m	≧14.0	15

Note:

The information given in this document is based on the existing technology level of the company.

The typical data listed in the table are collected from the internal test results for the reference of users in selecting materials. This document should not be regarded as an official commitment or quality guarantee, and users should determine the suitability of materials for their specific applications.

The above parameters can be adjusted according to customer requirements.

Product detail pictures:

Related Product Guide:

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of 2021 Good Quality Fiberglass Filament Yarn - Phenolic Fiberglass Molding Plastics for Electrical Insulation – Beihai Fiberglass , The product will supply to all over the world, such as: Serbia, Lithuania, Pakistan, Since always, we adhering to the "open and fair, share to get, the pursuit of excellence, and creation of value"values, adhere to the"integrity and efficient, trade-oriented, best way , best valve" business philosophy. Together with our all over the world have branches and partners to develop new business areas, maximum common values. We sincerely welcome and together we share in global resources, opening up new career together with the chapter.

1072tex Fiberglass Twisted Yarn